The following business description should be read in conjunction with the consolidated financial statements and notes thereto appearing elsewhere in this Annual Report on Form 10-K.

Cardo Medical, Inc. ("Cardo" or the "Company") is an early-stage orthopedic medical device company specializing in designing, developing and marketing reconstructive joint devices and spinal surgical devices. Reconstructive joint devices are used to replace knee, hip and other joints that have deteriorated through disease or injury. Spinal surgical devices involve products to stabilize the spine for fusion and reconstructive procedures. Within these areas, Cardo intends to focus on the higher-growth sectors of the orthopedic industry, such as advanced minimally invasive instrumentation and bone-conserving high-performance implants. Cardo is focused on developing surgical devices that will enable surgeons to bridge the gap between soft tissue-driven sports medicine techniques and classical reconstructive surgical procedures. Cardo commercializes its reconstructive joint devices through its Cardo Orthopedics division and its spine devices through its Cardo Spine division.

In December 2006, Cardo initiated sales of the Align 360 unicompartmental knee device, a partial knee resurfacing device for the medial or lateral part of the knee. Cardo has received approval under Section 510(k) of the Federal Food, Drug and Cosmetic Act ("Section 510(k)") for its uniquely instrumented patello-femoral arthroplasty, a resurfacing device for the back of the kneecap and distal femur. Cardo has also received FDA 510k approval for its Total Knee System which has both a posterior cruciate sacrificing as well as a posterior cruciate sparing component design. Cardo has also received FDA 510k approval for its total hip replacement system along with its monopolar and bipolar hip systems. Cardo received Section 510(k) approvals for its spinal lumbar fusion system and its cervical plate and screw systems. Cardo is actively engaged in a number of highly innovative research and development projects for total knee arthroplasty, spinal motion preservation, fusion devices and minimally invasive approaches for treating an array of joint and spinal disorders.

As of December 31, 2008, Cardo employed 19 full-time employees.

We have adopted a Code of Business Conduct and Ethics which is applicable to all of our employees, officers and directors (including our principal executive officer, principal financial officer and principal accounting officer). A copy of the Code of Business Conduct and Ethics is available on the Company's website at www.cardomedical.com.

Cardo Medical, LLC was formed on April 6, 2007 as a California limited liability company for the purpose of acquiring an interest in the medical device business conducted by Accin Corporation directly and through Accin's interests in Cervical Xpand, LLC and Uni-Knee, LLC. Following Cardo's organization:

• Cardo and Accin formed a Delaware limited liability company on April 20, 2007 under the name Accelerated Innovation, LLC;
• On May 21, 2007, Accin contributed substantially all of its business, properties and assets, including its majority interests in Cervical Xpand and Uni-Knee, to Accelerated in exchange for a 62.5% interest in Accelerated and the distribution referenced below in the amount of $3.75 million;
• Concurrently with the above, on May 21, 2007, Cardo contributed $3.75 million to Accelerated in exchange for a 37.5% interest in Accelerated; and
• The amount of $3.75 million was distributed by Accelerated to Accin

1

Under the terms of Accelerated's Limited Liability Company Agreement, Cardo was granted an option to purchase the 62.5% interest in Accelerated held by Accin for a purchase price of $6.25 million. Following the exercise of that option in June 2008, Cardo acquired all of the interests in Accelerated held by Accin, and Accelerated became a wholly-owned subsidiary of Cardo.

Prior to that, in February 2008, Cardo entered into Membership Interest Purchase Agreements with the holders of the minority membership interests in Cervical Xpand and Uni-Knee. Cervical Xpand and Uni-Knee were formed as New Jersey limited liability companies on July 12, 2005 and May 10, 2006, respectively, for the purpose of conducting research and development activities. Prior to the closing of the transactions contemplated by the Membership Interest Purchase Agreements, Accelerated, as the assignee of Accin's assets, owned 52.083% of the membership interests in Cervical Xpand and 51.21% of the membership interests in Uni-Knee, and the minority holders held the remaining outstanding interests. Upon the closing of the transactions contemplated by the Membership Interest Purchase Agreements, in June 2008, Cardo acquired the outstanding membership interests from the minority holders for an aggregate purchase price of $1,437,510 for the Cervical Xpand interests and $2,049,180 for the Uni-Knee interests. As a result, Cardo now owns all of the interests in Cervical Xpand and Uni-Knee directly and indirectly through its ownership of Accelerated.

On June 18, 2008, Cardo entered into a Merger Agreement and Plan of Reorganization with clickNsettle.com, Inc. ("CKST") and Cardo Acquisition, LLC, a California limited liability company and wholly-owned subsidiary of CKST. Upon the consummation of the transactions contemplated by the Merger Agreement, CKST acquired Cardo through a merger of Cardo with Cardo Acquisition, with Cardo continuing as the surviving entity in the Merger and a wholly-owned subsidiary of CKST. Pursuant to the Merger Agreement, all of the issued and outstanding units of Cardo's membership interests were converted into the right to receive shares of the common stock of CKST.

On or about the signing of the Merger Agreement, Frost Gamma Investments Trust and other investors invested $12.975 million in Cardo in exchange for units of Cardo's membership interests. Dr. Phillip Frost, Chairman and Chief Executive Officer of Opko Health, Inc., is the trustee and beneficiary of Frost Gamma Investments Trust. Cardo used approximately $9.7 million of the proceeds from these investments to close on the acquisition of the outstanding equity interests of three partially owned subsidiaries of Cardo (Accelerated Innovation, LLC, Cervical Xpand, LLC and Uni-Knee, LLC), to repay an existing member loan (in the amount of $1.2 million) and for transaction expenses, and expects to use the remaining funds to accelerate its research and product development.

In addition, as of the closing of the Merger, CKST had cash and cash equivalents of approximately $2.5 million held in money market accounts and certificates of deposit. In total, following the Merger, the combined company had $4.7 million in cash and cash equivalents.

Under the terms of the Merger Agreement, at the closing of the Merger, each Cardo unit issued and outstanding was converted into and exchanged for the right to receive 667,204.70995 shares of common stock of CKST. As a result of the Merger, CKST's shareholders and optionholders own approximately 5.5% of the combined company on a fully diluted basis (or 11,298,979 shares of common stock outstanding and underlying options), the members of Cardo, excluding the new investors, own approximately 64.8% of the combined company on a fully diluted basis (or 133,440,942 shares of common stock), the new investors own approximately 28.5% of the combined company on a fully diluted basis (or 58,641,701 shares of common stock), and optionholders of Cardo own approximately 1.2% of the combined company on a fully diluted basis (or 2,398,400 shares of common stock underlying those options).

As of the tenth day following the filing and transmission to shareholders of the Information Statement (approximately September 19, 2008), our Board of Directors consist of five directors originally designated by Andrew A. Brooks, M.D. and two directors originally designated by Phillip Frost, M.D. Dr. Brooks, an orthopedic surgeon, serves as the Chairman of the Board and Chief Executive Officer of the combined company as of the tenth day after we filed and transmitted the Information Statement. In the future, our directors will be designated by our shareholders. However, given that a few shareholders together own a majority of our common stock, they will be able to elect a majority of the directors of the company.

We are headquartered in Los Angeles, California. In connection with the consummation of the Merger, CKST approved through its shareholders an amendment to its Amended and Restated Certificate of Incorporation to change its name from "clickNsettle.com, Inc." to "Cardo Medical, Inc." CKST's trading symbol was "CKST.OB," which

2

has changed to "CDOM.OB" in connection with the name change. Cardo Medical's common stock is quoted on the National Association of Securities Dealers, Inc.'s, Over-the-Counter Bulletin Board, or the OTC Bulletin Board.

At March 30, 2009, we have $1.6 million in cash which is not projected to meet all of our working capital needs for the next twelve months. The fact that the Company sustained losses in 2008 and still requires outside sources of additional capital to sustain operations has created an uncertainty about the Company's ability to continue as a going concern.

Management intends to use borrowings and securities sales to mitigate the effects of our use of that cash. However, we cannot assure you that debt or equity financing, if and when required, will be available. Our ability to continue as a going concern is dependent upon receiving additional funds either through the issuance of debt or through common and/or preferred stock and the success of management's plan to expand sales. Although we may obtain external financing through the sales of our own securities, there can be no assurance that such financing will be available, or if available, that any such financing would be on terms acceptable to us. If we are unable to fund our cash flow needs, we may have to reduce or stop planned growth or scale back operations and reduce staff.

The Company develops and distributes reconstructive orthopedic and spinal surgery products to various medical organizations. The Company works in small, focused development teams in conjunction with physicians to rapidly develop products from conception to launch. The Company launched and commenced sales of its first product in late 2006, which was a high-performance, uni-compartmental knee replacement. The Company commenced sales of its reconstructive products in 2007 and spine products in 2008.

Following is a listing of our current products:

• Align 360 Unicompartmental Knee System - A uniquely instrumented partial knee replacement that allows resurfacing of either the medial or lateral compartments of the knee. This product promotes the consistent balancing of the flexion and extension gaps for unicompartmental knee surgery.
• Align 360 Patellofemoral System - A uniquely instrumented and novel patellofemoral system that allows resurfacing of the patellofemoral joint. This product is an anatomic system that addresses the disease of the patellofemoral joint.
• Align 360 Total Knee System - A uniquely instrumented high-performance total knee system consisting of posterior-stabilized and cruciate retaining femoral components.

• Accin Total Hip System - A taperloc type of hip system that allows replacement of the ball and socket of the hip joint. This product offers a dual taper hip design for total hip arthroplasty complemented by the Accin Bipolar and Monopolar Hip Systems for hip fracture applications.
• Accin Bipolar Hip System - A bipolar hip that allows replacement of the ball of the hip for either fracture, tumors or reconstruction from some other type of pathology.
• Accin Monopolar Hip System - A monopolar hip that allows replacement of the ball of the hip from either fracture, tumors or reconstruction from some other type of pathology.

3

Spinal Product Line

• Accin Lumbar Pedicle Screw/Rod System- A pedicle screw and rod system for instrumentation of lumbar spine fusion incorporating an evolutionary locking mechanism allowing for high screw angulation.
• Accin Cervical Plate/Screw System- An innovative low-profile system for cervical spine fusion incorporating an integrated, floating tapered-ring locking mechanism to simplify surgical procedure.

Our products listed above have received Section 510(k) approval. We have a number of earlier stage research and development projects underway, some of which we may submit for regulatory approval in the future.

According to the 2007-2008 Orthopaedic Industry Annual Report published by Knowledge Enterprises, Inc., which we refer to herein as the Industry Annual Report, the worldwide market for orthopedic products in 2007 was estimated to be $32.5 billion, representing an 11.8% increase from the previous year. According to this report, bone and joint diseases account for half of all the chronic conditions in people over 50 years of age. With the predicted doubling of the aged population by the year 2020, the report suggests that demographics alone will drive growth in the global orthopedic industry. We also believe that the orthopedic industry will continue to grow due to an increasingly older population and extended life spans in the United States and other developed countries worldwide.

According to the Industry Annual Report, the world's six largest replacement companies-Zimmer, Johnson & Johnson, Stryker, Smith & Nephew, Biomet and Wright Medical-generated 89% of joint product sales in 2007. We believe that the size of these companies often leads them to concentrate their marketing and research and development efforts on products that they believe will have a relatively high minimum threshold level of sales. As a result, there is an opportunity for a smaller orthopedic company, such as us, to focus on smaller, higher-growth sectors of the orthopedic market, while still offering a comprehensive product line to address the needs of its customers in a customized and interactive fashion.

Orthopedic devices are commonly divided into several primary sectors corresponding to the major subspecialties within the orthopedic field: reconstruction, trauma, arthroscopy, spine and biologics. Management's initial focus is on innovation related to reconstructive joint devices and spinal products, as discussed below.

Most reconstructive joint devices are used to replace or repair joints that have deteriorated as a result of disease or injury. Despite the availability of non-surgical treatment alternatives such as oral medications, injections and joint fluid supplementation of the knee, severe cases of disease or injury often require reconstructive joint surgery.

Reconstructive joint surgery involves modifying the bone area surrounding the affected joint and inserting one or more manufactured components, and also may involve using bone cement.

The reconstructive joint device market is generally divided into the areas of hips, knees and extremities. According to the Industry Annual Report, it is estimated that the worldwide reconstructive joint device market had sales of approximately $11.6 billion in 2007, with hip reconstruction and knee reconstruction representing the largest sectors.

Knee Reconstruction. The knee joint involves the surfaces of three distinct bones: the lower end of the femur, or thigh bone, the upper end of the tibia, or shin bone, and the patella, or kneecap. Cartilage on any of these surfaces can be damaged due to disease or injury, leading to pain and inflammation requiring knee reconstruction. According to the Industry Annual Report, knee reconstruction was the largest sector of the reconstructive joint device market in 2007, with estimated sales of approximately $5.9 billion worldwide.

One of the major trends in knee reconstruction includes the use of minimally invasive techniques to accomplish reconstructive goals with less damage to surrounding soft tissues. Our unicompartmental device has been designed to be inserted through small incision surgery with an innovative instrumentation approach. Our design approach

4

was to develop an innovative instrumentation system to improve and simplify surgical technique for a clinically proven implant concept. We believe that our system allows the surgeon to simply and reproducibly balance both flexion and extension gaps. This is a general approach we plan to continue with our other products.

Hip Reconstruction. The hip joint is a ball-and-socket joint that enables the large range of motion that the hip performs in daily life. The hip joint is most commonly replaced due to degeneration of the cartilage between the head of the femur (the ball) and the acetabulum or hollow portion of the pelvis (the socket). This degeneration causes pain, stiffness and a reduction in hip mobility. According to the Industry Annual Report, it is estimated that the worldwide hip reconstruction market had sales of approximately $5.1 billion in 2007.

Similar to the knee reconstruction market, major trends in hip replacement procedures and implants are to extend implant life and to preserve bone stock for possible future procedures. New products have been developed that incorporate advances in bearing surfaces from the traditional polyethylene surface. These alternative bearing surfaces include metal-on-metal, cross-linked polyethylene and ceramic-on-ceramic combinations, which exhibit improved wear characteristics and lead to longer implant life. In addition to advances in bearing surfaces, implants that preserve more natural bone have been developed in order to minimize surgical trauma and recovery time for patients. These implants, known as bone- conserving implants, leave more of the hip bones intact, which may be beneficial given the likelihood of future revision replacement procedures as the average patient's lifetime increases. Bone-conserving procedures are intended to enable patients to delay their first total hip procedure and may significantly increase the time from the first procedure to the time when a revision replacement implant is required. Our hip product portfolio, currently consisting of three products, is focused on improving the surgical techniques for bone-conservative procedures. These products integrate implant designs that are based on predicate devices (i.e., a device with a similar design that has already received clearance) with successful long-term clinical histories. We are actively engaged in several research and development efforts to develop better instrumentation for less traumatic surgeries, improved component designs and bearing surfaces to increase longevity of our devices.

Back and neck pain is one of the leading causes of healthcare expenditures in the United States, with a direct cost of approximately $86 billion annually for diagnosis, treatment and rehabilitation, according to an article published in The Journal of the American Medical Association (published February 13, 2008). According to the Industry Annual Report, the U.S. market for lumbar and cervical spine fusion, which is the focus of our spinal business, was estimated to be over $3 billion in 2006 and over $3.6 billion in 2007, and is estimated to grow to more than $4.2 billion in 2008.

The spine consists of vertebrae, which are 29 separate bones connecting the skull to the pelvis. The vertebrae are joined together by soft tissue structures that provide the core of the human skeleton. Within the spinal column, the spinal cord, which is the body's central nerve pathway, is protected by the bony parts of the vertebrae. Nerves contained in the spinal column exit through the foramen openings to the rest of the body. Vertebrae are joined to each other in pairs which are often referred to as motion segments. These motion segments move by means of three joints: two facet joints and one spine disc. The facet joints provide stability and enable the spine to bend and twist while the discs absorb pressures and shocks to the vertebrae.

The four major categories of spine disorders are degenerative conditions, deformities, trauma and tumors. The largest market, and the focus of our spinal research and development business, is degenerative conditions of the facet joints and disc space. These conditions can result in instability and pressure on the nerve roots as they exit the spinal column, causing back pain or radiating pain in the arms or legs.

The recommended treatments for spine disorders depend on the severity and duration of the disorder. Initially, physicians will prescribe non-operative procedures, including bed rest, bracing, medication, lifestyle modification, exercise, physical therapy, chiropractic care and steroid injections. In most cases, non-surgical treatment options are effective; however, many patients do not respond to non-operative treatments and require spine surgery to alleviate their symptoms.

It is estimated that in excess of one million patients undergo spine surgery each year in the United States. The most common spine surgery procedures are: discectomy, which consists of the removal of all or part of a damaged disc; laminectomy, the removal of all or part of a lamina, or thin layer of bone, to relieve pinching of the nerve and

5

narrowing of the spinal canal; and fusion, where two or more adjoining vertebrae are fused together to provide stability. All three of these procedures require access to the spine through either a traditional open approach or through smaller, less invasive methods using various types of retractors or other percutaneous techniques.

We believe that the implant market for spine surgery procedures will continue to grow because of the following market dynamics:

Demographics. The population cohort most likely to experience back pain is likely to grow as a result of our aging baby boomer population. The first baby boomers turned 62 in 2008, and over the next two decades we will see a substantial increase in our aging population. We believe that this generation of older people is less willing to compromise on reducing activity levels and is more interested in treatments that will allow a more rapid return to activities with shorter periods of disability.

Increased Acceptance of Implants. The implementation of implants for use in spine surgery has become the standard of care over the past decade. In the last five years, there has been a substantial and significant increase in the percentage of spinal fusion surgeries using implants. According to Millennium Research Group, an estimated 85% or more of all spinal fusion procedures involve an implant. The current generation of modern trained spine surgeons has accepted usage of implants as the gold standard for achieving optimal results.

Increased Demand for Newer Technologies. Because of the ubiquitous nature of back pain, the market is interested in newer technologies, such as motion preservation, and novel minimally invasive techniques which would potentially allow earlier intervention in the degenerative process of the spine for many patients.

Our products are regulated by the U.S. Food and Drug Administration, or the FDA, under the Federal Food, Drug, and Cosmetic Act. Some of our products also are regulated by state agencies. FDA regulations and the requirements of the Federal Food, Drug, and Cosmetic Act affect the pre-clinical and clinical testing, design, manufacture, safety, efficacy, labeling, storage, recordkeeping, advertising and promotion of our medical device products. FDA regulations govern, among other things, the following activities that we or our partners perform and will continue to perform:

• product design and development;
• product testing;
• product manufacturing;
• product labeling;
• product storage;
• premarket clearance or approval;
• advertising and promotion; and
• product sales and distribution.

Generally, before we can market a new medical device, marketing clearance from the FDA must be obtained through either a pre-market notification under Section 510(k) or the approval of a pre-market approval, or PMA, application. The FDA typically grants a Section 510(k) clearance if the applicant can establish that the device is substantially equivalent to a predicate device (i.e., a device with a similar design that has already received clearance). It generally takes approximately three months from the date of a Section 510(k) submission to obtain clearance, but it may take longer, particularly if a clinical trial is required. The FDA may find that a Section 510(k)

6

clearance is not appropriate or that substantial equivalence has not been shown and, as a result, will require a PMA application.

PMA applications must be supported by valid scientific evidence to demonstrate the safety and effectiveness of the device, typically including the results of human clinical trials, bench tests and laboratory and animal studies. The PMA application also must contain a complete description of the device and its components, and a detailed description of the methods, facilities and controls used to manufacture the device. In addition, the submission must include the proposed labeling and any training materials. The PMA application process can be expensive and generally takes significantly longer than the Section 510(k) process. Additionally, the FDA may never approve the PMA application. As part of the PMA application review process, the FDA generally will inspect the manufacturer's facilities to ensure compliance with applicable quality system regulatory requirements, which include quality control testing, control documentation and other quality assurance procedures.

If human clinical trials of a medical device are required and the device presents a significant risk, the sponsor of the trial must file an investigational device exemption, or IDE, application prior to commencing human clinical trials. The IDE application must be supported by data, typically including the results of animal and/or laboratory testing. If the IDE application is approved by the FDA and one or more institutional review boards, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more institutional review boards without separate approval from the FDA. Submission of an IDE does not give assurance that the FDA will approve the IDE and, if it is approved, we cannot assure you that the FDA will determine that the data derived from the trials support the safety and effectiveness of the device or warrant the continuation of clinical trials. An IDE supplement must be submitted to and approved by the FDA before a sponsor or investigator may make a change to the investigational plan that may affect its scientific soundness, study indication or the rights, safety or welfare of human subjects. The trial also must comply with the FDA's IDE regulations and informed consent must be obtained from each subject.

If the FDA believes we are not in compliance with the law, it can institute proceedings to detain or seize products, issue a market withdrawal, enjoin future violations and seek civil and criminal penalties against us and our officers and employees. If we fail to comply with these regulatory requirements, our business, financial condition and results of operations could be harmed.

Thus far, all of our approved products have been cleared by the FDA through the Section 510(k) pre-market notification process. We have not needed to conduct any clinical trials to support some of our regulatory approvals. Regulations regarding the manufacture and sale of our products are subject to change. We cannot predict the effect, if any, that these changes might have on our business, financial condition and results of operations. In addition to granting approvals for our products, the FDA has the authority to randomly inspect us for compliance with regulatory requirements that apply to our operations. These requirements include labeling regulations, manufacturing regulations, quality system regulations, regulations governing unapproved or off-label uses and medical device regulations. Medical device regulations require a manufacturer to report to the FDA serious adverse events or certain types of malfunctions involving its products. The FDA inspects device and drug manufacturing facilities in the United States in order to assure compliance with applicable quality system regulations. As discussed in the section below titled "Manufacturing and Supply," we currently outsource the manufacture of our products to third-party vendors.

Further, we are subject to various federal and state laws concerning health care fraud and abuse, including false claims laws, anti-kickback laws and physician self-referral laws. Violations of these laws can result in criminal and/or civil punishment, including fines, imprisonment and, in the United States, exclusion from participation in government health care programs. The scope of these laws and related regulations is expanding and their interpretation is evolving. There is very little precedent related to these laws and regulations. Increased funding for enforcement of these laws and regulations has resulted in greater scrutiny of marketing practices in our industry and resulted in several investigations by various government authorities. If a governmental authority were to determine that we do not comply with these laws and regulations, then we and our officers and employees could be subject to criminal and civil sanctions, including exclusion from participation in federal health care reimbursement programs.

7

International

In the next few years, we plan to seek required regulatory approvals and comply with extensive regulations governing product safety, quality, manufacturing and reimbursement processes in order to market our products in some major foreign markets, which may include countries in Latin America, Europe or Asia. These regulations vary significantly from country to country and with respect to the nature of the particular medical device. The time required to obtain these foreign approvals to market our products may be longer or shorter than that required in the United States, and requirements for approval may differ from FDA requirements.

If we sell any of our products internationally, the products will be subject to certain foreign regulatory approvals. In order to market our product devices in the member countries of the European Union, we will be required to comply with the European Medical Devices Directives and obtain "CE" mark certification. CE mark certification is the European symbol of adherence to quality assurance standards and compliance with applicable European Medical Devices Directives. Under the European Medical Devices Directives, all medical devices including active implants must qualify for CE marking. We also would be required to comply with other foreign regulations, such as obtaining Ministry of Health Labor and Welfare approval in Japan, Health Protection Branch approval in Canada, and Therapeutic Goods Administration approval in Australia, if we market in those jurisdictions.

Our research and development engineering personnel have extensive experience in developing medical devices to treat joint and spine pathologies. Our engineers work closely with surgeons to design devices that are intended to improve patient care, simplify surgical techniques and reduce overall costs. In addition to constantly enhancing and improving our current product offerings, we are focusing our research and development efforts in novel approaches to total knee arthroplasty, spinal motion preservation devices and products that promote new fusion techniques and minimally invasive surgical techniques for reconstructive and spinal surgery. Our research and development efforts are part of our overall business plan to become a market leader in providing solutions for the reconstructive joint and spine markets. To further promote this strategy, we are focused on converting these research and development efforts into commercially viable products that incorporate minimally invasive techniques and quick recovery to improve patient outcomes across all of our products. Currently, our research and development staff is located in New Jersey, and we also engage the services of independent contractors in that state. However, we intend to expand this staff by hiring engineers in California as well. We expect our research and development costs to increase as we continue to expend significant resources to develop and commercialize our products and potential products.

At this time, we have no formal consulting arrangements with surgeons. However, we work with surgeons informally to obtain their feedback to enhance our products and to identify product candidates that we would like to develop. We plan to work closely with product opinion leaders to develop and enhance our product portfolio. In 2008, we spent $1,332 on research and development as compared to $215 in 2007.

We do not have a manufacturing facility, and we currently do not intend to build manufacturing facilities of our own in the foreseeable future. We utilize third-party vendors to manufacture all of our implants and instruments, including components of our products, while internally performing product design and quality assurance. We currently use up to seven manufacturers for each of our devices.

Our outsourced manufacturing process typically involves machining semi-completed raw materials for both our metal and polyethylene components that make up our joint replacement systems. After being machined, the parts are inspected and processed in preparation for final polishing and finishing as needed. Prior to being packaged, our parts are inspected again to ensure that they are within approved specifications. We also use components in our devices that we acquire from other companies. We distribute both sterile and non-sterile implants and instruments.

Our outsourcing strategy is targeted at companies that meet FDA Quality Standards and our internal policies and procedures. Supplier performance is maintained and managed through a corrective action program intended to ensure that all product requirements are met or exceeded. We believe these manufacturing relationships minimize our capital investment, help control costs and allow us to compete with larger volume manufacturers of spine surgery and reconstructive surgical products.

8

We currently utilize a small number of manufacturers for our products and rely on a limited number of sources for our product components that are manufactured by third parties. In the future, we may consider manufacturing certain products or product components internally, if and when demand or quality requirements make it appropriate to do so.

Although we believe that alternative third-party manufacturers are available, we cannot assure you that we will be able to timely replace our third-party manufacturers immediately if one or more of them can no longer provide us with their manufacturing services. In addition, while we do not anticipate that we will encounter problems in obtaining adequate supplies of components, we cannot assure you that we will continue to be able to obtain components under acceptable terms and in a timely manner.

We mostly rely on third-party independent distributors to market and sell our products. In the future, we intend to increase the number of our internal sales and marketing personnel and further build our own sales and marketing infrastructure to market some of our products targeting surgeons in certain regions. We also intend to continue collaborating with third-party independent distributors, including large regional distributors.

We have applied for U.S. and foreign patents covering several of our implant components, and some of our surgical instrumentation. As of March 30, 2009, we had 19 pending domestic and foreign patent applications covering five devices.

Patents and intellectual property will continue to be an important aspect of the orthopedic and spine industry. In this regard, we intend to defend our intellectual property rights. We believe that our patents and products do not and will not infringe patents or violate proprietary rights of others, although it is possible that our existing patent rights may not be valid or that infringement of existing or future patents or proprietary rights may occur. If some of our intellectual property and agreements relating to our products are deemed invalid, that action may have a material adverse effect on our financial condition and results of operations.

The medical device industry is characterized by patent and other intellectual property litigation, and we could become subject to litigation that could be costly, result in diverting management's time and efforts, require us to pay damages and/or prevent us from marketing our existing or future products. Patent litigation typically involves complex factual and legal questions whose outcome is uncertain. Any claim relating to infringement of patents that is successfully asserted against us may require us to pay substantial damages. Even if successful, litigation to enforce our intellectual property rights or to defend our patents against challenge could be expensive and time-consuming and could divert our management's attention. Our success will depend in part on our not infringing patents issued to others, including our competitors and potential competitors. If our products are found to infringe the patents of others, the development, manufacture and sale of our products or potential products could be severely restricted or prohibited. Also, our competitors may independently develop similar technologies that are not restricted by other companies' patents, including ours. Due to the importance of our patents to our business, our market share can decline if we fail to protect our intellectual property rights.

A patent infringement suit brought against us or our partners may force us or our partners to halt the development, manufacture or sale of products or potential products that are claimed to be infringing, unless that party grants us or our partners rights to use its intellectual property. As a result, we may be required to obtain licenses to patents or proprietary rights of others in order to continue to commercialize our products, which we may not be able to do on acceptable terms, or at all. Even if we or any partner were able to obtain rights to the third party's intellectual property, these rights may be non-exclusive, thereby giving our competitors access to the same intellectual property. Ultimately, we may be unable to commercialize some of our products or potential products or may have to cease some of our business operations as a result of patent infringement claims, which could severely harm our business.

9

As more companies enter the orthopedic and spine market, the possibility of a patent infringement claim against us grows. While we try to ensure that our products do not infringe others' patents and proprietary rights, our products, potential products and methods may be covered by patents held by our competitors.

As of March 30, 2009, we had two registered trademark with the U.S. Patent and Trademark Office, or USPTO, for the marks "Accin" and "Align 360"; we have applications pending for the marks "Cardo Medical" and "A La Carte."

The orthopedic and spinal device industry is highly competitive and dominated by a number of large companies with substantially greater financial and other resources than we have. Our largest competitors in the orthopedic and spinal surgical device market are DePuy Orthopaedics, Inc. and DePuy Spine, Inc. (divisions of Johnson & Johnson Company), Zimmer, Inc. (a subsidiary of Zimmer Holdings, Inc.), Stryker Howmedica Osteonics (a subsidiary of Stryker Corporation), Smith & Nephew plc, Biomet Orthopedics, Inc. (a subsidiary of Biomet, Inc.), Medtronic Sofamor Danek, and Synthes Inc.

Companies in the industry compete on the basis of product features and design, innovation, service, the ability to maintain new product flow, relationships with key orthopedic surgeons and hospitals, the strength of their distribution network and price. While price is a key factor in the orthopedic market, other significant factors could negatively impact our results of operations and financial condition, including: technological innovation, reimbursement rates, surgeon preference, ease of use, clinical results and service provided by us and our representatives.

Our products are, and any potential products we commercialize will be, subject to intense competition. Many of our current and potential competitors have substantially greater financial, technical and marketing resources than we do, and they may succeed in developing products that would render our products obsolete or noncompetitive. Many of these competitors also have significantly greater operating history and reputations than we do in our respective fields. We may not be able to compete successfully if we are unable to develop proprietary products that reach the market in a timely manner, receive adequate reimbursement and are safer, less invasive and less expensive than alternatives available for the same purpose. Because of the rapidly growing orthopedic market, we anticipate that companies will dedicate significant resources to developing competing products.

Regarding our spinal portfolio, we also face competition from a growing number of smaller companies with more limited product offerings and geographic reach than our larger competitors. These companies, who represent intense competition in specified markets, include Abbott Spine, Inc. (a division of Abbott Laboratories, Inc.), Orthofix International N.V. (parent of Blackstone Medical, Inc.), Alphatec Spine Inc. (a subsidiary of Alphatec Holdings, Inc.), Globus Medical, Inc., and Nuvasive, Inc.

We are subject to potential product liability risks that are inherent in the design, marketing and sale of orthopedic implants and surgical instrumentation. We have implemented strict quality control measures and currently maintain product liability insurance in amounts that we believe are typical in the industry for companies with a comparable size to ours. Our insurance premiums are paid as a percentage of sales. We evaluate our levels of product liability insurance annually, as well as the amount of retention carried compared to other comparable companies in the industry. Due to the volatility of the insurance marketplace, the value of the product liability insurance products delivered and the small number of providers of these products, there can be no guarantees as to whether we will be able to secure coverage in the future at a reasonable cost.

Sales of our products will depend on the availability of adequate reimbursement from third-party payors (such as governmental programs, for example, Medicare and Medicaid, private insurance plans and managed care programs), both in terms of the sales volumes and prices of our products. Healthcare providers, such as hospitals that purchase

10

medical devices for treating their patients, generally rely on third-party payors to reimburse all or part of the costs and fees associated with the procedures performed with these devices. These third-party payors may deny reimbursement if they feel that a device is not the most cost-effective treatment available, or was used for an unapproved indication. As such, surgeons are unlikely to use our products if they do not receive reimbursement adequate to cover the cost of their involvement in the surgical procedures. We also believe that future reimbursement may be subject to increased restrictions both in the U.S. and internationally. If we sell our products internationally, market acceptance may depend, in part, upon the availability of reimbursement within the prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country, and include both government sponsored healthcare and private insurance.

Future legislation, regulation or reimbursement policies of third-party payors may adversely affect the demand for our existing products or our products currently under development and limit our ability to sell our products on a profitable basis.

Also, third-party payors are increasingly challenging the prices charged for medical products and services. Particularly in the United States, third-party payors carefully review, and increasingly challenge, the prices charged for procedures and medical products. Also, greater numbers of insured individuals are receiving (and will continue to receive over the next decade) their medical care through managed care programs, which monitor and often require pre-approval of the services that a member will receive. Many managed care programs are paying their providers on a capitated basis, which puts the providers at financial risk for the services provided to their patients by paying them a predetermined payment per member per month.

Legislative or administrative reforms to the U.S. or international reimbursement systems in a manner that significantly reduces reimbursement for procedures using our medical devices or denies coverage for those procedures could have a material adverse effect on our business, financial condition or results of operations. We believe that the overall escalating cost of medical products and services has led to, and will continue to lead to, increased pressures on the healthcare industry to reduce the costs of products and services. We cannot assure you that third-party reimbursement and coverage will be available or adequate, or that future legislation, regulation, or reimbursement policies of third-party payors will not adversely affect the demand for our products or our ability to sell these products on a profitable basis. We also cannot assure you that our products will be considered cost-effective by third-party payors, that reimbursement will be available or, if available, that the third-party payors' reimbursement policies will not adversely affect our ability to sell our products profitably.

Our relationship with surgeons, hospitals and the marketers of our products are subject to scrutiny under various state and federal anti-kickback, self-referral, false claims and similar laws, often referred to collectively as healthcare fraud and abuse laws. The federal anti-kickback laws prohibit unlawful inducements for the referral of business reimbursable under federally-funded health care programs, such as remuneration provided to physicians to induce them to use certain medical devices reimbursable by Medicare or Medicaid. Healthcare fraud and abuse laws are complex and subject to evolving interpretations, and even minor, inadvertent violations potentially can give rise to claims that the relevant law has been violated. Certain states in which we market our products have similar anti-kickback, anti-fee splitting and self-referral laws, imposing substantial penalties for violations. Any violations of these laws could result in a material adverse effect on the market price of our common stock, as well as our business, financial condition and results of operations. We cannot assure you that any of the healthcare fraud and abuse laws will not change or be interpreted in the future in a manner which restricts or adversely affects our business activities or relationships with surgeons, hospitals and marketers of our products. In addition, possible sanctions for violating these anti-kickback laws include monetary fines, civil and criminal penalties, exclusion from Medicare and Medicaid programs and forfeiture of amounts collected in violation of these prohibitions.

We must comply with a variety of other laws, such as laws prohibiting false claims for reimbursement under Medicare and Medicaid, which also can be triggered by violations of federal anti-kickback laws; Healthcare Insurance Portability and Accountability Act of 1996, which protects the privacy of individually identifiable healthcare information; and the Federal Trade Commission Act and similar laws regulating advertisement and consumer protections. In certain cases, federal and state authorities pursue actions for false claims on the basis that manufacturers and distributors are promoting unapproved or off-label uses of their products.

11

Management's Plan

To achieve our growth objectives, we are considering different strategies, including growth through acquisitions and raising additional capital. As a result, we are constantly and aggressively evaluating and we will continue to evaluate other companies and businesses for potential synergies that would add value to our existing operations

Our business, financial condition, results of operations, cash flows and prospects, and the prevailing market price and performance of our common stock, may be adversely affected by a number of factors, including the matters discussed below. Certain statements and information set forth in this Annual Report on Form 10-K, as well as other written or oral statements made from time to time by us or by our authorized officers on our behalf, constitute "forward-looking statements" within the meaning of the Federal Private Securities Litigation Reform Act of 1995. We intend for our forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in the Private Securities Litigation Reform Act of 1995. You should note that our forward-looking statements speak only as of the date of this Annual Report on Form 10-K or when made and we undertake no duty or obligation to update or revise our forward-looking statements, whether as a result of new information, future events or otherwise. Although we believe that the expectations, plans, intentions and projections reflected in our forward-looking statements are reasonable, such statements are subject to known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.

We have identified the following categories of risk that should be considered by investors:

• Risks related to our business, industry and regulatory matters;
• Risks related to our financial results, including our ability to raise needed additional capital.
• Risks related to our intellectual property and potential litigation; and
• Risks related to ownership of our common stock.

We anticipate spending significant amounts of cash on expanding our research and development, sales and marketing efforts, and product commercialization. We have available to us approximately $1.6 million in cash and cash equivalents, which we expect will not be sufficient for us to meet our anticipated cash requirements for at least the next 12 months. Management intends to use borrowings and securities sales to mitigate the effects of our use of that cash. However, we cannot assure you that debt or equity financing, if and when required, will be available. Our ability to continue as a going concern is dependent upon receiving additional funds either through the issuance of debt or through common and/or preferred stock and the success of management's plan to expand sales. Although we may obtain external financing through the sales of our own securities, there can be no assurance that such financing will be available, or if available, that any such financing would be on terms acceptable to us. If we are unable to fund our cash flow needs, we may have to reduce or stop planned growth or scale back operations and reduce staff. Our actual capital requirements may change as a result of various factors, including:

• the success of our research and development efforts, and any changes in the breadth of our research and development programs;
• results from preclinical studies and clinical trials conducted by us or our collaborative partners or licensees, if any;

12

• the number and timing of acquisitions and other strategic transactions;
• our ability to maintain and establish corporate relationships and research collaborations;
• our ability to manage growth and costs associated with this growth, and the costs associated with increased capital expenditures;
• the time and costs involved in filing, prosecuting, defending and enforcing patent and intellectual property claims;
• the cost and timing of obtaining and maintaining regulatory approval or clearance for our products and products in development;
• the expenses we incur in manufacturing and selling our products;
• the revenues generated by sales of our products; and
• the costs associated with our employee retention programs and related benefits.

Our primary goal as it relates to liquidity and capital resources is to attain the appropriate level of debt and equity and the resultant cash to implement our business plan. We will need to raise additional funds, which may not be available to us on favorable terms, if at all. If we raise capital by issuing equity or debt securities, our existing shareholders may experience dilution and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing shareholders. Further, if we raise additional funds through collaboration, licensing or other similar arrangements, it may be necessary to relinquish rights to our potential products or proprietary technologies, or to grant licenses on terms that are not favorable to us. If we are unable to raise needed capital on terms acceptable to us, we may not be able to develop new products, enhance our existing products, execute our business plan, take advantage of future opportunities, or respond to competitive pressures or unanticipated customer requirements. Any of these events could have a material adverse effect on our business, financial condition and results of operations.

We expect to incur significant losses over the next several years, either directly or indirectly through the companies in which we develop our products, as we expand our research and development activities, apply for regulatory approvals, develop additional technology and expand our operations. We cannot assure you that we will be successful in selling or licensing any of the products we might develop or predict the terms we may be able to obtain in any sales or licensing transaction.

We currently have eight products available for sale, all of which are in the early stages of distribution. Other than these products, we are in the preliminary stages of product identification and development, and have identified only a few potential additional products. We have not yet conducted preclinical studies or clinical testing on these additional products. It is statistically unlikely that the few products that we have identified as potential candidates will actually lead to successful development efforts, and we do not expect any additional products resulting from our research to be commercially available for several years, if at all. Our leads for potential products will be subject to the risks and failures inherent in developing medical devices and products, including, but not limited to, the unanticipated problems relating to research and development, product testing, confirming intellectual property rights and non-infringement, regulatory compliance, manufacturing, marketing and competition. Additional expenses may exceed current estimates and, therefore, adversely affect our profitability.

13

Cost containment measures, pressure from our competitors and availability of medical reimbursement may impact our ability to sell our products at prices necessary to expand our operations and reach profitability.

Healthcare costs have risen significantly over the past decade and numerous initiatives and reforms initiated by legislators, regulators and third-party payors to curb these costs have resulted in a consolidation trend in the healthcare industry, including hospitals. This has resulted in greater pricing and other competitive pressures and the exclusion of certain suppliers from important market segments as group purchasing organizations, independent delivery networks and large single accounts continue to consolidate purchasing decisions for some hospital customers. We expect that market demand, government regulation, third-party reimbursement policies and societal pressures will continue to change the national and worldwide healthcare industry, resulting in further business consolidations and alliances among customers and competitors. This consolidation may reduce competition, exert downward pressure on the prices of our products and adversely impact our business, financial condition or results of operations.

Further, third-party payors in the United States and abroad continue to work to contain healthcare costs. The introduction of cost containment incentives, along with closer scrutiny of healthcare expenditures by both private health insurers and employers, has resulted in increased discounts and contractual adjustments to hospital charges for services performed and has shifted services between inpatient and outpatient settings. Hospitals or physicians may respond to these cost-containment pressures by substituting lower-cost products or other therapies for our products.

Future legislation, regulation or reimbursement policies of third-party payors may adversely affect the demand for our existing products or our products currently under development and limit our ability to sell our products on a profitable basis.

Also, third-party payors are increasingly challenging the prices charged for medical products and services. Particularly in the United States, third-party payors carefully review, and increasingly challenge, the prices charged for procedures and medical products. Also, greater numbers of insured individuals are receiving (and will continue to receive over the next decade) their medical care through managed care programs, which monitor and often require pre-approval of the services that a member will receive. Many managed care programs are paying their providers on a capitated basis, which puts the providers at financial risk for the services provided to their patients by paying them a predetermined payment per member per month.

Numerous new companies and technologies, as well as more established companies, have entered this market. New entrants to our markets include numerous niche companies with a singular product focus, as well as companies owned partially by surgeons, who may have greater access than we do to the surgeons who may use our products. As a result of this intensified competition, we believe there will be increasing pressure to reduce pricing of our medical devices. If we are unable to price our products appropriately due to these competitive pressures or for other reasons, our profit margins will shrink and our ability to invest in and grow our business and achieve profitability will decrease.

Healthcare providers, such as hospitals that purchase medical devices for treating their patients, generally rely on third-party payors to reimburse all or part of the costs and fees associated with the procedures performed with these devices. These third-party payors may deny reimbursement if they feel that a device is not the most cost-effective treatment available, or was used for an unapproved indication. As such, surgeons are unlikely to use our products if they do not receive reimbursement adequate to cover the cost of their involvement in the surgical procedures. We also believe that future reimbursement may be subject to increased restrictions both in the U.S. and international markets. If we sell our products internationally, market acceptance may depend, in part, upon the availability of reimbursement within the prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country, and include both government sponsored healthcare and private insurance.

14

Legislative or administrative reforms to the U.S. or international reimbursement systems in a manner that significantly reduces reimbursement for procedures using our medical devices or denies coverage for those procedures could have a material adverse effect on our business, financial condition or results of operations.

We believe that the overall escalating cost of medical products and services has led to, and will continue to lead to, increased pressures on the healthcare industry to reduce the costs of products and services. We cannot assure you that third-party reimbursement and coverage will be available or adequate, or that future legislation, regulation, or reimbursement policies of third-party payors will not adversely affect the demand for our products or our ability to sell these products on a profitable basis. We also cannot assure you that our products will be considered cost-effective by third-party payors, that reimbursement will be available or, if available, that the third-party payors' reimbursement policies will not adversely affect our ability to sell our products profitably.

To be commercially successful, we believe that we will need surgeons to adopt our products as their preferred treatment option for their patients. Based on our experience, we believe surgeons may not widely adopt our products unless they determine, based on clinical data and published peer-reviewed journal articles, that our products provide benefits or an attractive alternative to conventional modalities of treating joint and spine disorders. Surgeons may be slow to adopt our products for the following reasons, among others:

• lack of clinical evidence;
• the time that must be dedicated for training;
• lack of experience with our products;
• perceived risks generally associated with the use of new products and procedures;
• perceived risks associated with purchasing products from an early-stage medical device company;
• costs associated with the purchase of new products and equipment; and
• limited availability of reimbursement within healthcare payment systems.

We also believe that recommendations and support of our products by influential surgeons are essential for market acceptance and adoption. If we do not receive support from these surgeons, surgeons and hospitals may not use our products. As a result, we may not achieve expected revenues and may never become profitable.

We believe that to sell and market our products effectively, we must establish relationships with key surgeons and hospitals in the field of orthopedic knee, hip and spinal surgery. Many of these key surgeons and hospitals already have long-standing relationships with large, better-known companies that dominate the medical devices industry through collaborative research programs and other relationships. Because of these existing relationships, some of which may be contractually enforced, surgeons and hospitals may be reluctant to adopt our products, particularly if our products compete with or have the potential to compete with products supported through their own collaborative research programs or by these existing relationships. Even if these surgeons and hospitals purchase our products, they may be unwilling to enter into collaborative relationships with us to promote joint marketing programs or to provide us with clinical and financial data.

We work primarily with a network of independent orthopedic product agents and distributors that generate sales leads for us, in addition to working with our own internal direct sales force. If these product agents and distributors

15

believe that their relationship with us is less beneficial than other relationships they may have with more established or well-known medical device companies, they may be unwilling to continue their relationships with us, making it more difficult for us to sell and market our products effectively.

We anticipate that we will generally not enter into long-term contracts with our customers. As a result, we will be exposed to volatility in the market for our products and loss of our customers, and we may be unable to achieve profitability. If we are unable to market our products on terms we find acceptable, our financial condition and results of operations could suffer materially.

We believe that the aging of the general population and increasingly active lifestyles will continue and that these trends will increase the need for our medical products. However, the projected demand for our products could differ materially from actual demand if our assumptions regarding these trends and acceptance of our products by the medical community prove to be incorrect or do not materialize, or if non-surgical treatments gain more widespread acceptance as a viable alternative to our devices.

The medical device market is highly competitive, subject to rapid change, and significantly affected by new product introductions and other market activities of industry participants. We expect to encounter intense competition across our product lines and in each market in which our products are sold from various medical device companies, many of which are likely to have greater financial and marketing resources than us. Primary competitors are Zimmer, J&J/DePuy Orthopaedics, Stryker and Biomet in the hips and knees market, and Medtronic/Sofamor Danek, J&J/DePuy Spine and Synthes in the spine market. In addition, we will face competition from a wide range of companies that sell a single or a limited number of competitive products or which participate only in a specific market segment, as well as from non-medical device companies, including pharmaceutical companies, which may offer alternative therapies for disease states intended to be treated using our products.

Additionally, the medical device market is characterized by extensive research and development, and rapid technological change. Developments by other companies of new or improved products, processes or technologies may make our products or proposed products obsolete or less competitive and may negatively impact our revenues. We will be required to devote continued efforts and financial resources to develop or acquire scientifically advanced technologies and products, apply our technologies cost-effectively across product lines and markets, attract and retain skilled development personnel, obtain patent and other protection for our technologies and products, obtain required regulatory and reimbursement approvals and successfully manufacture and market our products consistent with our quality standards. If we fail to develop new products or enhance existing products, it could have a material adverse effect on our business, financial condition or results of operations.

We rely on third-party manufacturers to manufacture our products. It is critical to our business that our contract manufacturers be able to provide us with products in substantial quantities, in accordance with agreed upon specifications, in compliance with regulatory requirements, at acceptable cost and on a timely basis. Our anticipated growth could strain the ability of manufacturers to deliver an increasingly large supply of products. If we are unable to obtain sufficient quantities of high quality products to meet customer demand on a timely and cost-effective basis, we could lose customers, our reputation could be harmed and our business could suffer.

We currently use up to seven manufacturers for each of our devices. Our dependence on these few manufacturers involves several risks, including limited control over pricing, availability, quality and delivery schedules. If any one or more of our manufacturers cease to provide us with sufficient quantities of our products in a timely manner or on terms acceptable to us, or cease to manufacture products of acceptable quality, we would have to seek alternative

16

sources of manufacturing. We could experience delays while we locate and engage alternative qualified manufacturers, and we might be unable to engage alternative manufacturers on favorable terms, if at all. Any disruption or increased expenses relating to our supply source could harm our sales and marketing efforts and adversely affect our ability to generate revenue.

We believe that it is important for us to continue to build a more complete product offering and to enhance the products we currently offer. Our success in this regard will depend in part on our ability to develop and introduce new products and product enhancements to keep pace with the rapidly changing medical device market. We cannot assure you that we will be able to successfully develop, obtain regulatory approval for or market new products or product enhancements, or that any of our future products or enhancements will be accepted by the surgeons who use our products or the payors who financially support many of the procedures performed with our products.

Factors affecting the success of any new product offering or enhancement to an existing product include our ability to:

• properly identify and anticipate surgeon and patient needs;
• develop and introduce new products or product enhancements in a timely manner;
• avoid infringing upon the intellectual property rights of third parties;
• obtain the necessary regulatory clearances or approvals for new products or product enhancements;
• demonstrate, if required, the safety and efficacy of new products with data from preclinical studies and clinical trials;
• provide adequate training to potential users of our products;
• receive adequate reimbursement; and
• develop an effective and dedicated marketing and distribution network.

If we do not develop new products or product enhancements in time to meet market demand or if there is insufficient demand for these products or enhancements, our results of operations may suffer.

We believe that our success depends in part on our ability to continually enhance and broaden our product offering in response to changing customer demands, competitive pressures and technologies and our ability to increase our market share. To achieve this growth, we intend to pursue acquisition of complementary businesses, products or technologies, in some cases instead of developing them ourselves. We may be unable to successfully complete any acquisitions, or we may not be able to successfully integrate any acquired business, product or technology into our business or retain any key personnel, manufacturers or distributors. The success of any acquisition, investment or alliance undertaken will depend on a number of factors, including: 

• our ability to identify suitable opportunities;
• our ability to finance any acquisition, investment or alliance;

17

• whether we are able to establish an acquisition, investment or alliance on terms that are satisfactory to us, if at all;
• the strength of the other companies' underlying technology and ability to execute;
• intellectual property and litigation related to these technologies or businesses; and
• our ability to successfully integrate the acquired company or business with our existing business, including the ability to adequately fund acquired in-process research and development projects.

These efforts could be expensive and time-consuming, disrupt our ongoing business and distract management. If we are unable to integrate any future acquired businesses, products or technologies effectively, our business, financial condition and results of operations will be materially adversely affected. For example, an acquisition could materially impair our operating results by causing us to incur debt or requiring us to amortize significant amounts of expenses, including non-cash acquisition costs, and acquired assets.

We depend upon independent sales distributors and sales representatives to market and sell our products, in particular due to their sales and service expertise and relationships with customers in the marketplace. Independent distributors and sales representatives may terminate their relationships with us or devote insufficient sales efforts to our products for any number of reasons. We do not control our independent distributors and they may not be successful in implementing our marketing plans. If we fail to maintain our existing relationships with our independent distributors and sales representatives, our operations would suffer. Similarly, our failure to recruit and retain additional skilled, independent sales distributors and sales representatives could have an adverse effect on our operations. We may experience turnover with some of our independent sales distributors, which could adversely affect our short-term financial results while we transition to new distributors. Our failure to manage these transitions effectively could negatively impact our operations and profitability.

Our success depends in part upon the continued service of Andrew A. Brooks, M.D., who serves as our Chairman of the Board and Chief Executive Officer, and Mikhail Kvitnitsky, who serves as our President and Chief Operating Officer. Dr. Brooks and Mr. Kvitnitsky are critical to the overall management of our company as well as to the development of our technology, our culture and our strategic direction. The loss of either Dr. Brooks or Mr. Kvitnitsky could have a material adverse effect on our business, results of operations and financial condition. We have not obtained and do not expect to obtain any key-person life insurance policies.

Our success will depend on our ability to continuously attract and retain highly qualified management and scientific personnel and on our ability to develop relationships with academic collaborators. The competition for qualified personnel and collaborators is intense. We cannot assure you that we will be able to attract or retain personnel or cultivate academic collaborations. In addition, our collaborators may have arrangements with other companies to assist those companies in developing products that compete with ours. Our inability to hire or retain qualified personnel or cultivate academic collaborations would harm our business. We must attract and retain qualified personnel and third-party distributors and manage and train them effectively. Personnel qualified in the design, development, production and marketing of our products are difficult to find and hire, and enhancements of information technology systems to support our growth are difficult to implement. In addition, we will need to carefully monitor and manage our surgeon services, and the quality assurance and efficiency of our manufacturers and distributors. This managing, training and monitoring will require allocation of valuable management resources and significant expense.

18

If conflicts arise between collaborators or advisors and us, any of these parties may act in its self-interest, which may be adverse to our interests and the interests of our stockholders.

We expect to enter into arrangements with corporate collaborators and scientific advisors to help us develop and test potential products or enhance our existing products. If conflicts arise between us and any of these corporate collaborators or scientific advisors, the other party may act in its self-interest and not in our interest or the interests of our stockholders. It is possible that some of our corporate collaborators will be conducting multiple product development efforts within each area that is the subject of the collaboration with us. We also might be required to agree not to conduct independently, or with any third party, any research that is competitive with the research conducted under our collaborations. In addition, any of these collaborators may develop, either alone or with others, products in related fields that are competitive with the products or potential products that are the subject of our collaboration with them. Competing products, either developed by collaborators or to which collaborators have rights, may result in their withdrawing support for our product candidates.

We continue to experience growth in, and will continue to pursue rapid growth in, the number of surgeons using our products, the types of products we offer and the number of states in which our products are sold. This growth has placed and will continue to place significant demands on our managerial, operational and financial resources and systems. We are currently focused on increasing the size and effectiveness of our sales force and distribution network, marketing activities, research and development efforts, inventory management systems, management team, accounting systems and corporate infrastructure. If we do not manage our growth effectively, the quality of our products, our relationships with surgeons, distributors and hospitals, and our reputation could suffer.

The efficient operation of our business is dependent on our management information systems, which we rely upon to effectively manage accounting and financial functions, manage order entry, order fulfillment and inventory replenishment processes, and maintain our research and development data. We are assessing various inventory tracking software, as well as an improved ledger accounting system for all business units, which will enhance our internal controls. In addition, we are taking steps to unify the financial reporting of our consolidated subsidiaries, and we are in the initial planning phase of upgrading, where possible, certain of our information technology systems impacting financial reporting.

Any failure of our management information systems to perform as we anticipate could disrupt our business and product development and could result in decreased sales, increased overhead costs, excess inventory and product shortages, causing our business and results of operations to suffer.

If a key facility is affected by a natural or man-made disaster, we would be forced to rely on another third-party manufacturer. We do not have insurance for potential losses as a result of damages to these manufacturing facilities.

We currently do not market or sell our products outside of the United States. However, we may actively pursue one or more international markets within the next few years, at which point we would be exposed to risks separate and distinct from those we face in our U.S. operations. Any international business we may engage in may be adversely affected by changing economic conditions in foreign countries, as well as U.S. laws that may affect the international business operations of a U.S. company such as ours. In addition, increases or decreases in the value of the U.S. dollar relative to foreign currencies could affect our results of operations since international sales most likely would be denominated in the functional currency of the country in which the product is sold.

19

The additional or different risks inherent in engaging in international business include the following:

• compliance with existing and changing foreign regulatory laws and requirements;
• export restrictions and controls and other government regulation relating to technology or medical devices;
• foreign laws and business practices favoring local companies;
• pricing pressures that we may experience internationally;
• the availability and level of reimbursement within prevailing foreign healthcare payment systems or insurance providers;
• shipping delays due to cross-border sales;
• longer payment cycles;
• difficulties and costs of establishing, staffing and managing foreign operations;
• potentially adverse tax consequences, tariffs and other trade barriers;
• difficulties in enforcing intellectual property rights;
• difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;
• political and economic instability; and
• international terrorism and anti-American sentiment.

Our exposure to each of these risks may increase our costs, impair our ability to market and sell our products and require significant management attention, resulting in harm to our business and financial results.

The medical device industry is regulated extensively by governmental authorities, principally the Food and Drug Administration, or the FDA, and corresponding state and foreign regulatory agencies. The FDA and other federal, state and foreign governmental agencies regulate, among other things, the development, manufacturing, clinical trials, marketing clearance and approval, promotion and sale of medical devices.

In particular, the FDA permits commercial distribution of a new medical device only after the device has received clearance under Section 510(k), or is the subject of an approved premarket approval application, or PMA. The FDA will approve marketing a medical device through the Section 510(k) process if it is demonstrated that the new product is substantially equivalent to other Section 510(k)-cleared products. The PMA process is more costly, lengthy and uncertain than the Section 510(k) clearance process. A PMA application must be supported by extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data, to demonstrate to the FDA's satisfaction the safety and efficacy of the device for its intended use. To date, all of our products, unless exempt, have been cleared through the Section 510(k) process. We have no experience in obtaining premarket approval.

20

Compliance with complex regulations is, and will continue to be, time-consuming, burdensome and expensive. Failure to comply with these regulations could jeopardize our ability to manufacture and sell our products and result in enforcement actions such as warning letters, fines, injunctions, civil penalties, termination of distribution, seizures of products, total or partial suspension of production, refusal of the FDA or other regulatory agencies to grant future clearances or approvals, or withdrawals or suspensions of current clearances or approvals. These enforcement actions could result in higher than anticipated costs or lower than anticipated revenue and have a material adverse effect on our business, financial condition and results of operations. In the most egregious cases, we could face criminal sanctions, closure of the manufacturing facilities in which our products are manufactured, and prohibitions on the sales of our products.

U.S. federal government entities, such as the Occupational Safety and Health Administration, the Environmental Protection Agency, the Internal Revenue Service, the Centers for Medicare and Medicaid Services and the U.S. Department of Veteran's Affairs, as well as the FDA and regulatory authorities in other states, have each been empowered to administer certain laws and regulations applicable to us. Many of the laws and regulations are complex, and compliance will require substantial time and effort by our officers, directors and employees and extensive consultations with our advisors. Because of this complexity, we cannot assure you that our efforts will be sufficient to ensure compliance with all of these laws and regulations at any given time.

We are subject to audit, investigation and litigation by each of these entities to ensure compliance, each of which also can be time-consuming, costly, divert the attention of senior management and have a significant effect on our business, even if we are found to have been in compliance or the extent of our non-compliance is deemed immaterial. If we are found to not be in compliance with any of these laws and regulations, we and, in some cases, our officers and directors may be subject to fines, penalties, criminal sanctions and other liability, any of which could have a material adverse effect on our business.

Foreign governmental authorities that regulate the manufacture and sale of medical devices have become increasingly vigilant, and if we engage in sales of our products in foreign countries, these sales would be subject to rigorous foreign regulations. In these circumstances, we would rely heavily on our foreign independent sales agencies to comply with the varying regulations, and any failures on their part could result in restrictions on the sale of our products in foreign countries. We currently do not sell any of our products internationally.

Legislation may be drafted from time to time and introduced in Congress that could significantly change the statutory provisions governing the clearance or approval, manufacture and marketing of a medical device in the United States. In addition, FDA regulations and guidance often are revised or reinterpreted by the agency in ways that may significantly affect our business and our ability to commercialize our products. It is impossible to predict whether legislative changes will be enacted or FDA regulations, guidance or interpretations changed, and what the impact of these changes, if any, may be. For example, on September 27, 2007, Congress enacted, and the President signed into law, the Food and Drug Administration Amendments Act of 2007. This new legislation grants significant new powers to the FDA and imposes new obligations and requirements on both the FDA and FDA-regulated industries, including the medical device industry. In particular, this law requires, among other things, that the FDA propose, and ultimately implement, regulations that will require manufacturers to label medical devices with unique identifiers unless a waiver is received from the FDA. In addition, it reauthorizes the FDA to collect medical device user fees and amends the existing user fee program by, among other things, reducing device application fees and imposing new fees, including a new annual establishment registration fee. Also, the new law authorizes the FDA to establish a unique medical device identification system and expands the federal government's clinical trial registry and results databank to include, among other things, information on medical device clinical trials. While these new requirements undoubtedly will have a significant effect on the medical device industry, we cannot yet predict the extent of that effect on our company. As regulations, guidance and interpretations are issued by the FDA relating to the new legislation, its impact on the industry, as well as our business, will become clearer. Compliance with those regulations could require us to take additional steps, and incur additional costs, in manufacturing and labeling products.

21

We have not yet collected long-term clinical data to support the safety of our products, and our products may, therefore, prove to be less safe and effective than initially thought.

We obtained clearance to offer all of our products that require FDA clearance or approval through the Section 510(k) clearance process, which is less rigorous than the PMA process and requires less supporting clinical data. As a result of using this expedited process, we currently lack the breadth of published long-term clinical data supporting the safety of our products and the benefits they offer that might have been generated using the PMA process. Because of the lack of this in-depth data, surgeons may be slow to adopt our products, we may not have comparative data that our competitors have or are generating, and we may be subject to greater regulatory and product liability risks. Further, future patient studies or clinical experience may indicate that treatment with our products does not improve outcomes. These results would reduce demand for our products, thereby preventing us from becoming profitable. If future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to significant legal liability and harm to our business reputation. The medical device market has been particularly prone to costly product liability litigation.

Any modification to a Section 510(k)-cleared device that could significantly affect its safety or efficacy, or that would constitute a major change in its intended use, requires a new Section 510(k) clearance or, possibly, premarket approval. Under FDA regulations, every manufacturer must make this determination in the first instance, but the FDA may review any manufacturer's decision. The FDA may not agree with any of our decisions regarding whether new clearances or approvals are necessary. If the FDA requires us to seek Section 510(k) clearance or premarket approval for any modification to a previously cleared product, we may be required to cease marketing, or to recall, the modified product until we obtain clearance or approval. This may expose us to significant regulatory fines or penalties.

In addition, our products could be subject to recall if the FDA determines, for any reason, that our products are not safe or effective. Any recall or FDA requirement that we seek additional approvals or clearances could result in delays, fines, costs associated with modifying a product, loss of revenue, harm to our reputation and loss of customers and potential operating restrictions imposed by the FDA. Any product liability claim or recall would divert managerial and financial resources and could harm our reputation with customers. We cannot assure you that we will not have product liability claims or recalls in the future, or that these claims or recalls would not have a material adverse effect on our business.

We and some of our third-party manufacturers are required to comply with the FDA's Quality System Regulation, or QSR, which covers the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of our products. In addition, we and our manufacturers will be subject to the regulations of foreign jurisdictions regarding the manufacturing process if we market our products overseas.

The FDA enforces the QSR through periodic and unannounced inspections of manufacturing facilities. If our facilities or those of our manufacturers fail to take satisfactory corrective action in response to an adverse QSR inspection, the FDA could take enforcement action, including any of the following sanctions:

• customer notifications or repair, replacement, refunds, recall, detention or seizure of our products;
• operating restrictions or partial suspension or total shutdown of production;
• untitled letters, warning letters, fines, injunctions, consent decrees and civil penalties;

22

• refusing or delaying requests for Section 510(k) clearance or PMA approvals of new products or modified products;
• withdrawing Section 510(k) clearances or PMA approvals;
• refusal to grant export approval for our products; or
• criminal prosecution.

If we sell our products in the European Community, we will be required to maintain certain ISO certifications and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. We cannot assure you that we or our manufacturers will be able to obtain or maintain all required registrations and certifications.

Any of these factors could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers' demands. We also may be required to bear other costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.

Although the United States currently does not have a mandatory medical device registry, a few medical organizations in the country do, such as Kaiser Permanente and the Hospital for Specialty Surgery in New York, and some foreign countries do have national registries, such as Australia, Britain, Norway and Sweden. If a national or any state registry is created to collect data on how patients with artificial joints fare, surgeons who use our products would be required to provide information to that registry. Although it is difficult to determine all of the effects of the creation of a medical device registry, one effect it may have is to make surgeons use well-documented medical devices, instead of new ones. If the surgeons who use our products are required to participate in a national or state registry, they may be less inclined to use our products and, consequently, our ability to sell our products could be impaired.

We are an early-stage orthopedic medical device company with a limited operating history. We began commercial sales in 2007. We currently have the following eight products with Section 510(k) marketing clearance from the FDA: Accin Unicompartmental Knee (used in partial knee replacement procedures); Accin Patello-Femoral Component (used in partial knee replacement procedures); Cardo Total Knee System, (used in total knee replacement procedures); Accin Hip System (used in total hip replacement procedures); Accin Bipolar Hip System (two-piece product used in femoral head replacement procedures); Accin Monopolar Hip System (one-piece product used in femoral head replacement procedures), Accin Lumbar Pedicle Screw/Rod System, and Accin Cervical Plate/Screw System.

We have a limited history of operations upon which you can evaluate our business, and our operating expenses are increasing. We have yet to demonstrate that we can generate ongoing sufficient sales of our products to become profitable. The extent of our future operating losses and the timing of profitability, if at all, are difficult to predict. Our lack of any significant operating history also limits your ability to make a comparative evaluation of us, our products and our prospects. Even if we do achieve profitability as planned, we may not be able to sustain or increase profitability on an ongoing basis.

As a result of the exercise of the option with Accin Corporation, Cardo became the sole holder of all of the ownership interests in Accelerated. Under the terms of the Contribution Agreement, dated as of May 21, 2007, between Cardo and Accin, Accelerated Innovation assumed all of Accin's ongoing operations and all of Accin's

23

disclosed and undisclosed liabilities. Cervical Xpand and Uni-Knee may have undisclosed liabilities as well. Our right to indemnity with respect to any undisclosed liabilities is limited, and, accordingly, any material undisclosed liabilities of Accin could have a material adverse effect on our business, financial condition and results of operations.

Cardo's acquisition of substantially all of the assets of Accin (through its ownership of Accelerated Innovation) may make it more difficult for you to evaluate and predict our future operating performance because our financial statements only reflect results of operations that include those assets for the period from May 21, 2007, the date Cardo acquired those assets, through June 30, 2008. Consequently, our historical results of operations and the pro forma financial information provided elsewhere in this report may not give you an accurate indication of how we, together with the business acquired from Accin, will perform in the future.

Our quarterly operating results are difficult to predict and may fluctuate significantly from period to period, particularly because our sales prospects are uncertain. These fluctuations also may affect our annual operating results and may cause those results to fluctuate unexpectedly from year to year. The level of our revenues and results of operations at any given time will be based primarily on the following factors:

• our ability to increase sales of our products;
• our ability to develop, manufacture and market new products;
• results of clinical research and trials on our current or planned products;
• our ability to obtain regulatory approvals;
• legislative and reimbursement policy changes affecting the products we may offer or those of our competitors; 
• the variability of the profit margins among the products we sell;
• our ability to expand and maintain an effective and dedicated sales force;
• pricing pressure from competitors applicable to our products;
• adverse third-party reimbursement outcomes;
• timing of new product launches, acquisitions, licenses or other significant events by us or our competitors;
• the ability of our manufacturers to timely provide us with an adequate supply of products and meet our quality requirements; and
• interruption in the manufacturing or distribution of our products.

For all the foregoing reasons, it will be difficult for us to forecast demand for our products with any degree of certainty. In addition, we will be increasing our operating expenses as we build our commercial capabilities. Accordingly, we may experience significant, unanticipated quarterly losses. Because of these factors, our operating results in one or more future quarters may fail to meet the expectations of securities analysts or investors.

24

Risks Related to Our Intellectual Property and Potential Litigation

Our success depends on our ability to protect our proprietary rights to the technologies used in our products. We rely significantly on patent protection, as well as a combination of trade secrets, know-how, continuing technological innovations, strategic alliances and licensing opportunities to develop, maintain and strengthen our competitive position. We also expect to pursue a policy of generally obtaining patent protection in both the United States and abroad for patentable subject matter in our proprietary devices and attempt to review third-party patents and patent applications to the extent they become known to develop an effective patent strategy, avoid infringing third-party patents, identify licensing opportunities and monitor the patent claims of others.

We have a number of U.S. and foreign patent applications pending in spine, hip and knee reconstructive surgery. Although we have filed these patent applications, we cannot assure you that any patents may issue or that, if they issue, these patents will adequately protect our rights or permit us to gain or keep any competitive advantage.

The U.S. Patent and Trademark Office, or USPTO, may deny or require significant narrowing of claims in our pending patent applications, and patents issued as a result of the pending patent applications, if any, may not provide us with significant commercial protection or be issued in a form that is advantageous to us. We also could incur substantial costs in proceedings before the USPTO. These proceedings could result in adverse decisions as to the priority of our inventions and the narrowing or invalidation of claims in any patents that may issue. Any U.S. and foreign patents that may be issued in the future could subsequently be successfully challenged by others and invalidated or rendered unenforceable, which could limit our ability to stop competitors from marketing and selling related products.

Both the patent application process and the process of managing patent disputes can be time-consuming and expensive. Competitors may be able to design around our patents or develop products that provide outcomes that are comparable to our products. Although we have entered into confidentiality agreements and intellectual property assignment agreements with certain of our employees, consultants and advisors as one of the ways we seek to protect our intellectual property and other proprietary technology, these agreements may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements. Furthermore, the laws of some foreign countries may not protect our intellectual property rights to the same extent as the laws of the United States, if at all. Since most of our pending patent applications are for the United States only, we lack a corresponding scope of patent protection in other countries. Thus, we may not be able to stop a competitor from marketing products in other countries that are similar to some of our products.

There are numerous proposed changes to the patent laws and rules of the USPTO, which, if enacted, may have a significant impact on our ability to protect our technology and enforce our intellectual property rights. For example, proposed changes to the patent rules of the USPTO were scheduled to take effect on November 1, 2007, which would have limited significantly the right to pursue continuation applications. On October 31, 2007, a temporary injunction was granted in a lawsuit against the USPTO which served to stay the application of the proposed rules. On April 1, 2008, the court issued its ruling that the proposed patent rules were void, thus making the injunction permanent. If the ruling is successfully appealed, the proposed rules may take effect and may adversely impact our ability to prevent others from designing around our existing patents.

Moreover, Congress is considering several significant changes to the U.S. patent laws, including changing from a "first to invent" to a "first inventor to file" system, requiring that patent lawsuits be brought in the forum of the defendant, requiring the apportionment of patent damages, and creating a post-grant opposition process to challenge patents after they have issued.

25

Our commercial success depends significantly on our ability to operate without infringing the patents and other proprietary rights of third parties.

Other entities may have or obtain patents or proprietary rights that could limit our ability to manufacture, use, sell, offer for sale or import products or impair our competitive position. In addition, to the extent that a third party develops new technology that covers our products, we may be required to obtain licenses to that technology, which licenses may not be available or may not be available on commercially reasonable terms, if at all. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third-party patent or circumvent the third-party patent, which would be costly and would require significant time and attention of our management. Third parties may have or obtain valid and enforceable patents or proprietary rights that could block us from developing products using our technology. Our failure to obtain a license to any technology that we require could materially harm our business, financial condition and results of operations.

The medical device market in which we primarily participate is in large part technology-driven. Physician customers move quickly to new products and new technologies. As a result, intellectual property rights, particularly patents and trade secrets, play a significant role in product development and differentiation. However, intellectual property litigation to defend or create market advantage is inherently complex and unpredictable. Furthermore, appellate courts frequently overturn lower court patent decisions.

In addition, competing parties frequently file multiple suits to leverage patent portfolios across product lines, technologies and geographies and to balance risk and exposure between the parties. In some cases, several competitors are parties in the same proceeding, or in a series of related proceedings, or litigate multiple features of a single class of medical devices. These forces frequently drive settlement not only of individual cases, but also of a series of pending and potentially related and unrelated cases. In addition, although monetary and injunctive relief is typically sought, remedies and restitution generally are not determined until the conclusion of the proceedings and are frequently modified on appeal. Accordingly, the outcomes of individual cases are difficult to time, predict or quantify and are often dependent upon the outcomes of other cases in other geographies.

Certain product categories, including pedicle screws, have been subject to significant patent litigation in recent years. Since we sell orthopedic and spinal devices, such as pedicle screws, knee replacement devices, and cervical plates, and we recently introduced our Accin pedicle screw system, any related litigation could harm our business.

We also may have to take legal action in the future to protect our patents, trade secrets or know-how or to assert them against claimed infringement by others. Any legal action of that type could be costly and time-consuming, and we cannot assure you that any lawsuit will be successful. In addition, we may not have sufficient resources to enforce our intellectual property rights or to defend our patents against a challenge.

Further, we intend to protect our proprietary technology, in part, through proprietary information and inventions agreements with employees, consultants and other parties. These agreements with some of our employees and consultants generally contain standard provisions requiring those individuals to assign to the employer, without additional consideration, inventions conceived or reduced to practice by them while employed or retained by the employer, subject to customary exceptions. If any of our employees, consultants or others breach these agreements, or if these agreements are found to be unenforceable, competitors may learn of our trade secrets and proprietary information.

For the reasons indicated above, enforcing our intellectual property rights may be costly, difficult and time-consuming. Even if successful, litigation to enforce our intellectual property rights or to defend our patents against challenge could be expensive and time-consuming and could divert our management's attention.

26

Patent infringement lawsuits brought against us could have a material adverse affect on our ability to develop and sell our products and to operate profitably.

As the number of entrants into our market increases, the possibility of a patent infringement claim against us grows. While we make an effort to ensure that our products do not infringe other parties' patents and proprietary rights, our products and methods may be covered by patents held by our competitors. In addition, our competitors may assert that future products we may market infringe their patents.

A patent infringement suit brought against us or any strategic partners or licensees may force us or any strategic partners or licensees to stop or delay developing, manufacturing or selling potential products that are claimed to infringe a third party's intellectual property, unless that party grants us or any strategic partners or licensees rights to use its intellectual property. In those cases, we may be required to obtain licenses to patents or proprietary rights of others in order to continue to commercialize our products. However, we may not be able to obtain any licenses required under any patents or proprietary rights of third parties on acceptable terms, or at all, and any licenses may require substantial royalties or other payments by us. Even if we, any strategic partners or licensees were able to obtain rights to the third party's intellectual property, these rights may be non-exclusive, thereby giving our competitors access to the same intellectual property. Ultimately, we may be unable to commercialize some of our potential products or may have to cease some of our business operations as a result of patent infringement claims, which could severely harm our business.

Some of our employees and consultants were previously employed or engaged at universities or other medical device companies, including our competitors or potential competitors. We could in the future be subject to claims that these employees and consultants, or we, have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. If we fail to defend against these claims, a court could order us to pay substantial damages and prohibit us from using technologies or features that are essential to our products and processes, if these technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. In addition, we may lose valuable intellectual property rights or personnel. A loss of key research personnel or their work product could hamper or prevent our ability to commercialize certain potential products, which could severely harm our business. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

Many jurisdictions, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, most countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may be limited to monetary relief and may be unable to enjoin infringement, which could materially diminish the value of the patent. Compulsory licensing of life-saving products also is becoming increasingly popular in developing countries, either through direct legislation or international initiatives. These compulsory licenses could be extended to include some of our products or product candidates, which may limit our potential revenue opportunities.

We hold a number of insurance policies, including product liability insurance, errors and omissions insurance, directors' and officers' liability insurance, property insurance, general liability insurance, employee benefits liability and workers' compensation insurance. If the costs of maintaining adequate insurance coverage increases significantly at any time, our operating results could be materially adversely impacted. Likewise, if any of our current insurance coverage should become unavailable to us or become economically impractical, we would be required to operate our business without indemnity from commercial insurance providers.

27

Potential future product liability claims and other litigation, including contract litigation, may adversely affect our business, reputation and ability to attract and retain customers.

Reconstructive and spine surgery involves a high risk of serious complications, including bleeding, nerve injury, paralysis and even death. As a result, we are exposed to potential product liability claims that are inherent in the testing, manufacture and sale of medical devices for surgery procedures. Many of these medical devices are designed to be implanted in the human body for long periods of time or indefinitely. A number of factors could result in an unsafe condition or injury to, or death of, a patient with respect to these or other products that we manufacture or sell, including component failures, manufacturing flaws, design defects or inadequate disclosure of product-related risks or product-related information. These factors could result in product liability claims, a recall of one or more products or a safety alert relating to one or more products. Product liability claims may be brought by individuals or by groups seeking to represent a class.

In connection with Cardo's purchase of Accin's assets in May 2007 (through its ownership of Accelerated Innovation) and as a result of the Merger, we assumed the responsibility for any litigation or claims related to Accin's business, including product liability claims relating to products previously sold by Accin. The outcome of litigation, particularly class action lawsuits, is difficult to assess or quantify. Plaintiffs in these lawsuits often seek recovery of very large or indeterminate amounts, including not only actual damages, but also punitive damages. The magnitude of the potential loss relating to these lawsuits may remain unknown for substantial periods of time. In addition, the cost to defend against any future litigation may be significant.

Any product liability claim brought against us, with or without merit, could result in the increase of our insurance rates or the inability to secure coverage in the future. In addition, if our product liability insurance proves to be inadequate to pay a damage award, we may have to pay the excess out of our cash reserves, which may harm our financial condition. If longer-term patient results and experience indicate that our products or any component cause tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. Finally, even a meritless or unsuccessful product liability claim could harm our reputation in the industry, lead to significant legal fees and result in diverting management's attention from managing our business.

Even if any product liability loss is covered by an insurance policy, these policies have substantial retentions or deductibles that provide that insurance proceeds are not recoverable until the losses incurred exceed the amount of those retentions or deductibles. To the extent that any losses are below these retentions or deductibles, we will be responsible for paying these losses. Paying retentions or deductibles for a significant amount of claims could have a material adverse effect on our business, financial condition and results of operations.

Further, it is possible that we may in the future be substantially self-insured with respect to general and product liability claims. As a result of economic factors currently impacting the insurance industry, meaningful product liability insurance coverage also may become unavailable due to its economically prohibitive cost. The absence of significant third-party insurance coverage increases potential exposure to unanticipated claims and adverse decisions. As a result, product liability claims, product recalls and other litigation in the future, regardless of their outcome, could have a material adverse effect on our financial position, results of operations or liquidity.

Our relationship with surgeons, hospitals and the marketers of our products are subject to scrutiny under various state and federal anti-kickback, self-referral, false claims and similar laws, often referred to collectively as healthcare fraud and abuse laws. The federal anti-kickback laws prohibit unlawful inducements for the referral of business reimbursable under federally-funded health care programs, such as remuneration provided to physicians to induce them to use certain medical devices reimbursable by Medicare or Medicaid. Healthcare fraud and abuse laws are complex and subject to evolving interpretations, and even minor, inadvertent violations potentially can give rise to claims that the relevant law has been violated. Certain states in which we market our products have similar anti-kickback, anti-fee splitting and self-referral laws, imposing substantial penalties for violations. Any violations of these laws could result in a material adverse effect on the market price of our common stock, as well as our business, financial condition and results of operations. We cannot assure you that any of the healthcare fraud and abuse laws will not change or be interpreted in the future in a manner which restricts or adversely affects our business activities or

28

relationships with surgeons, hospitals and marketers of our products. In addition, possible sanctions for violating these anti-kickback laws include monetary fines, civil and criminal penalties, exclusion from Medicare and Medicaid programs and forfeiture of amounts collected in violation of these prohibitions.

Federal anti-kickback laws and regulations prohibit any knowing and willful offer, payment, solicitation or receipt of any form of remuneration by an individual or entity in return for, or to induce:

• the referral of an individual for a service or product for which payment may be made by Medicare, Medicaid or other government-sponsored healthcare program; or
• purchasing, leasing, ordering or arranging for any service or product for which payment may be made by a government-sponsored healthcare program.

We must comply with a variety of other laws, such as laws prohibiting false claims for reimbursement under Medicare and Medicaid, which also can be triggered by violations of federal anti-kickback laws; Healthcare Insurance Portability and Accountability Act of 1996, which protects the privacy of individually identifiable healthcare information; and the Federal Trade Commission Act and similar laws regulating advertisement and consumer protections. In certain cases, federal and state authorities pursue actions for false claims on the basis that manufacturers and distributors are promoting unapproved or off-label uses of their products.

Pursuant to FDA regulations, we can market our products only for cleared or approved uses. Although surgeons are permitted to use medical devices for indications other than those cleared or approved by the FDA based on their medical judgment, we are prohibited from promoting products for those off-label uses. We market our products and provide promotional materials and training programs to surgeons regarding the use of our products. Although we believe our marketing, promotional materials and training programs for surgeons do not constitute promotion of unapproved uses of our products, if it is determined that our marketing, promotional materials or training programs constitute promotion of unapproved uses, we could be subject to significant fines in addition to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure and criminal penalty.

The scope and enforcement of these laws is uncertain and subject to rapid change, especially in light of the lack of applicable precedent and regulations. We cannot assure you that federal or state regulatory authorities will not challenge or investigate our current or future activities under these laws. Any challenge or investigation could have a material adverse effect on our business, financial condition and results of operations. Any state or federal regulatory review of us, regardless of the outcome, would be costly and time-consuming. Additionally, we cannot predict the impact of any changes in these laws, and whether or not they will be retroactive.

There is a very minimal public market for our common stock. We cannot predict how liquid the market for our common stock might become. Our common stock will likely be thinly traded compared to larger more widely known companies.